Galaxy Fan for DX48 / 93 / 95 / 95T2 / 98VHP

$8.95
In stock
(0) Write a Review
SKU:
EX13N46014R

Product Description

Galaxy DX-48T, DX-93T & DX-95T Rear Heatsink DC Cooling Fan Assembly (Part # EX13N46014R / EX13N46008)

Maintain safe operating temperatures across your high-output mobile transceiver's final amplifier heatsink with this genuine OEM Galaxy Rear Heatsink DC Cooling Fan Assembly (Factory Part Numbers EX13N46014R / EX13N46008, Fan Model Numbers DF124010SM / DF1204SH). Built to factory 12V DC airflow and acoustic specifications, this direct drop-in replacement cooling fan restores continuous heat dissipation on high-power Galaxy chassis including the Galaxy DX-48T, Galaxy DX-93T, and Galaxy DX-95T—eliminating noisy bearing rattle, seized blades, and thermal shutdowns during extended transmit sessions.

⚠️ AIRFLOW DIRECTION, 12V DC POLARITY & NO-RETURN POLICY WARNINGS

• Airflow Orientation: Verify the airflow direction arrows stamped on the fan frame against your original factory orientation prior to mounting so air is drawn cleanly across the rear heatsink fins.
• 12V DC Lead Polarity & Connector: Carefully photograph and verify the positive (+12V DC) and negative (Ground) lead polarity and plug keying before connecting or soldering, as brushless DC fan motors can be damaged by reverse polarity.
• No-Return Policy Notice: Due to sensitive internal brushless motor driver electronics and soldered/plugged power leads involved, replacement cooling fans are strictly non-returnable once installed, soldered, or powered up.

Product Specifications & Technical Data

  • Manufacturer / Brand: Galaxy / Ranger (Genuine Factory OEM Service Replacement Part)
  • Factory Part Numbers / SKUs: EX13N46014R, EX13N46008
  • Fan Model Designations: G12V DC Fan DF124010SM / DF1204SH
  • Operating Voltage: 12V DC Nominal
  • Component Designation: Brushless DC Heatsink Cooling Fan Assembly
  • Function: Provides active forced-air cooling across the rear RF power amplifier heatsink during transmit operation
  • Mounting & Fitment: Direct Factory Heatsink Mount Replacement for Galaxy DX-48T, DX-93T, and DX-95T Mobile Transceivers
  • Quality Standard: 100% Genuine Factory Original Equipment Manufacturer (OEM) Electronic Component
  • Compatible Radio Models:
    • Galaxy High-Power Mobile Transceivers: Galaxy DX-48T, Galaxy DX-93T, Galaxy DX-95T (and compatible heatsink-cooled Galaxy/Ranger chassis utilizing EX13N46014R or EX13N46008)

Installation & Bench Notes

  • Diagnoses & Solves: Loud bearing whine or grinding noise, seized or sluggish fan blades, overheating rear amplifier heatsinks, and thermal power foldback.
  • BENCH INSTALLATION PROCEDURE:
    • Disconnect the 13.8V DC power cord and antenna coaxial cable from the transceiver chassis. Remove the bottom or top cabinet cover as required to access the internal fan power header.
    • Photograph the existing fan's airflow direction arrow, mounting screw/spacer hardware, and internal 12V DC power plug routing before removal.
    • Unplug or desolder the faulty fan leads and remove the mounting screws securing the fan frame to the rear amplifier heatsink.
    • Position the new EX13N46014R / EX13N46008 (DF124010SM / DF1204SH) fan squarely against the heatsink with the airflow arrow matching your reference photo, and tighten the mounting hardware evenly without pinching the frame.
    • Route the power leads cleanly away from fan blades and hot RF components, and connect to the 12V DC header observing strict positive/negative polarity.
    • Apply power on the bench, verify smooth, quiet fan rotation and proper airflow across the heatsink, and reinstall the cabinet cover.