Loading... Please wait...


Mark IVA OEM Overlay Set Self-Adhesive NOS

  • Image 1
IVA Overlay

Product Description

Mark IVA OEM Overlay Set Self-Adhesive NOS.

You are purchasing one NEW Original OEM Browning Mark IVA self-adhesive Overlay set. These are not thin decals but the heavy original overlays used by Browning.

Browning used both Overlay and screen printed type face plate on the Golden Eagle Mark IVA radios. The overlay type is like a decal is attached to the face plate whereas the screeen-printed is painted directly on the metal. These will replace both type but is should be noted that on the screen-printed type the leads on all the red LED's will have to be shorten, this is accomplished by bending the lead slightly to shorten the length. On the 6 LEDs on the Transmitter you can simply move the small printed circuit board to the rear of the mounting clip and this will give you additional adjustment. Be sure the clip does not short out any traces as there where several version of the PC Board. The reason being that on the screen-printed type face plate the LED's protrudes through the opening in the metal and on the overlay types the LED only fills the opening. If you do not shorten the leads the LED's will push the overlay outward and damaged the new face plate. The ID plates that are used on many IVA are not need with these overlays as the Mark IVA ID is printed on them but the plates can be attached to these same as the originals.  Not to be used on Mark IV models as this will be misleading.



Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...