Loading... Please wait...


Mark IV OEM Overlay Set Self-Adhesive NOS

  • Image 1

Product Description

Mark IV OEM Overlay Set Self-Adhesive NOS.


You are purchasing one NEW Original OEM Browning Mark IV self-adhesive Overlay set. These are not the thin decals but original overlays used by Browning. Surface must be clean and clear of dirt and defects for a good bond.

Browning used both Overlay and screen printed type faceplate on the Golden Eagle Mark IV radios. The overlay type is like a decal is attached to the face plate whereas the screeen-printed is painted directly on the metal. These will replace both type but is should be noted that on the screen-printed type the leads on all the red LED's will have to be shorten, this is accomplished by bending the lead slightly to shorten the length. On the 6 LEDs on the Transmitter you can simply move the small printed circuit board to the rear of the mounting clip and this will give you additional adjustment. Be sure the clip does not short out any traces as there where several version of the PC Board. The reason being that on the screen-printed type faceplate the LED's protrudes through the opening in the metal and on the overlay types the LED only fills the opening. If you do not shorten the leads the LED's will push the overlay outward and damaged the new faceplate.



Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...