Loading... Please wait...


Mark IV Faceplates New

  • Image 1
Mark IV Faceplates

Product Description

Mark IV Tx and RX Faceplates New
Mark IV TX and RX Faceplates, this set of new faceplates for both the transmitter and receiver include new dial lens and channel readout lens. These are the overlay type of faceplates. Browning used both overlay and screen print type faceplate on the Golden Eagle Mark IV. The overlay type is like a decal is attached to the faceplate where as the screen-printed is painted directly to the metal. Note: The receiver metal will be recondition with new paint, the transmitter metal and both overlays and dial lens will be brand new. 
These will replace both type but is should be noted that on the screen-printed type the leads on all the red LED's will have to be shorten, this is accomplished by bending the lead slightly to shorten the length. On the 6 LEDs on the Transmitter you can simply move the small printed circuit board to the rear of the mounting clip and this will give you additional adjustment. Be sure the clip does not short out any traces as there where several version of the PC Board. The reason being that on the screen-printed type faceplate the LED's protrudes through the opening in the metal and on the overlay types the LED only fills the opening. If you do not shorten the leads the LED's will push the overlay outward and damaged the new faceplate. Your speaker grill is attached to the new faceplate using clear silicone; the only soldering is removing and reattaching the mike plug. Repair services are available if needed, you may wish to print this section if you are planning to purchase these faceplates as they do not include directions.

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...